學術期刊論文
  1. Kuan-Heng Liu, Yung-Hui Shih, Guo-Ju Chen, Jaw-Min Chou, "Microstructural Study on Oxygen Permeated Arc Beads", Journal of Nanomaterials, vol. 2015, pp. 373861, 2015.07
    國際期刊 SCI,多位作者(第四作者), Impact Factor: 1.644, Rank Factor: 122/260
    Subject Categories: MATERIALS SCIENCE
    義大機構典藏
  2. 2.Kuan-Heng Liu, Yung-Hui Shih, Guo-Ju Chen, Jaw-Min Chou, "Microstructural Study on Molten Marks of Fire-Causing Copper Wires", Materials, vol. 8, no. 6, pp. 3776-3790, 2015.06
    國際期刊 SCI,多位作者(第四作者), Impact Factor: 2.651, Rank Factor: 55/260
    Subject Categories: MATERIALS SCIENCE
    義大機構典藏
  3. G. J. Chen, W. S. Hwang, S. H. Liu, J. M. Chou, "Investigation on properties of Bentonite type in cold bonded pelletization of flue dust", Advanced Materials Research, vol. 409, pp. 743-748, 2012.01
    國際期刊 其他(有ISSN碼),多位作者(第四作者)
  4. J.H. Chang, S.K. Tzeng, J.M. Chou, R.I. Hsieh, J.L. Lee, "Effect of dry sliding wear conditions on a vacuum induction melted Ni alloy", Wear, vol. 270, no. 3-4, pp. 294-301, 2011.01
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 1.635, Rank Factor: 18/122
    Subject Categories: ENGINEERING, MECHANICAL
    義大機構典藏
  5. C. J. Su, J. M. Chou, S. H. Liu, "Effect of Bottom Blowing Conditions on Refractory Erosion in the Ironmaking Smelter by Water Modeling", Materials Transactions, vol. 51, no. 9, pp. 1586-1593, 2010.09
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 0.753, Rank Factor: 22/63
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  6. C. J. Su, J. M. Chou, S. H. Liu, C. H. Chiang, "Effect of Gas Bottom Blowing Conditions on Mixing of Molten Iron inside an Ironmaking Smelter", Materials Transactions, vol. 51, no. 9, pp. 1594-1601, 2010.09
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 0.753, Rank Factor: 22/63
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  7. C. J. Su, J. M. Chou, S. H. Liu, "Effect of Gas Bottom Blowing Conditions on Fluid Flow Phenomena and Mixing Time of Molten Iron inside an Ironmaking Smelter", Materials Transactions, vol. 51, no. 9, pp. 1602-1608, 2010.09
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 0.753, Rank Factor: 22/63
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  8. J. H. Chang, C. P. Chang, J. M. Chou*, R. I. Hsieh, J. L. Lee, "Microstructure and bonding behavior on the interface of an induction–melted Ni-based alloy coating and AISI 4140 steel substrate", Surface and Coatings Technology, vol. 204, no. 20, pp. 3173-3181, 2010.07
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 1.860, Rank Factor: 3/16
    Subject Categories: MATERIALS SCIENCE, COATINGS & FILMS
    義大機構典藏
  9. J. H. Chang, J. M. Chou*, R. I. Hsieh, J. L. Lee, "Corrosion behavior of vacuum induction-melted Ni-based alloy in sulphuric acid", Corrosion Science, vol. 52, no. 7, pp. 2323-2330, 2010.07
    國際期刊 SCI,多位作者(通訊作者), Impact Factor: 2.316, Rank Factor: 3/70
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  10. J. H. Chang, T. H. Liu, J. M. Chou*, R. I. Hsieh, J. L. Lee, "Microstructural and microhardness characteristics of induction melted Nickel-based alloys", Materials Chemistry and Physics, vol. 120, no. 2-3, pp. 702-708, 2010.04
    國際期刊 SCI, EI,多位作者(通訊作者), Impact Factor: 1.799, Rank Factor: 55/192
    Subject Categories: MATERIALS SCIENCE, MULTIDISCIPLINARY
    義大機構典藏
  11. J. H. Chang, J. M. Chou, R. I. Hsieh, J. L. Lee, "Influence of fusing temperature on microstructure, wear and corrosion resistance of induction melted bimetal of Co-based alloy and AISI 4140 steel", Materials Chemistry and Physics, vol. 118, no. 2-3, pp. 314-321, 2009.12
    國際期刊 SCI,多位作者(通訊作者), Impact Factor: 1.799, Rank Factor: 55/192
    Subject Categories: MATERIALS SCIENCE, MULTIDISCIPLINARY
    義大機構典藏
  12. C. J Su, J. M. Chou, S. H. Liu, "Effect of gas bottom blowing condition on mixing molten iron and slag inside ironmaking smelter", Materials Transactions, vol. 50, no. 6, pp. 1502-1509, 2009.06
    國際期刊 SCI,多位作者(通訊作者), Impact Factor: 0.753, Rank Factor: 22/63
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  13. J. H. Chang, J. M. Chou, R. I. Hsieh, J. L. Lee, "Corrosion behaviour of an alloy formed by inductive melting of a cobalt-based alloy and AISI 4140 steel", Corrosion Science, vol. 51, no. 5, pp. 987-996, 2009.05
    國際期刊 SCI,多位作者(通訊作者), Impact Factor: 2.293, Rank Factor: 3/63
    Subject Categories: METALLURGY & METALLURGICAL ENGINEERING
    義大機構典藏
  14. C. Y. Kuan, M. H. Hon, J. M. Chou, I. C. Leu, "Growth Behavior, Microstructure Characterization, and Field.-Emission Property of 6-Fold Hierarchical Zn/ZnO Structures Prepared by Direct Annealing", Crystal Growth & Design, vol. 9, no. 2, pp. 813-819, 2009.02
    國際期刊 SCI,多位作者(第三作者), Impact Factor: 4.215, Rank Factor: 1/25
    Subject Categories: Crystallography
    義大機構典藏
  15. C. Y. Kuan, M. H. Hon, J. M. Chou, I. C. Leu, "Wetting Characterisyics on Micro/nanostructured Zinc Oxide Coating", Journal of The Electrochemical Society, vol. 156, no. 2, pp. J32-J36, 2009.02
    國際期刊 SCI,多位作者(第三作者), Impact Factor: 2.437, Rank Factor: 1/16
    Subject Categories: Materials Science, Coating & Films
    義大機構典藏
  16. C. Y. Kuan, J. M. Chou, I. C. Leu, M. H. Hon, "Sol-Gel-derived ZnO Coating with Nanopatterns Fabricated by Nanoimprinting", Journal of the American Ceramic Society, vol. 91, no. 10, pp. 3160-3166, 2008.10
    國際期刊 SCI,多位作者(第二作者), Impact Factor: 1.792, Rank Factor: 1/25
    Subject Categories: MATERIALS SCIENCE, CERAMICS
    義大機構典藏
  17. C. Y. Kuan, J. M. Chou, I. C. Leu, M. H. Hon, "Self-organized Zn/ZnO core-shelled hierarchical structures prepared by aqueous chemical growth", Journal of Materials Research, vol. 23, no. 4, pp. 1163-1167, 2008.04
    國際期刊 SCI,多位作者(第二作者), Impact Factor: 1.916, Rank Factor: 39/190
    Subject Categories: Materials Science, Multidisciplinary
    義大機構典藏
  18. C.Y. Kuan, J.M. Chou, I.C. Leu, M.H. Hon, "Sixfold self-assembled hierarchical structures synthesized by direct annealing of Zn microtips", Journal of Solid State Chemistry, vol. 181, no. 3, pp. 673-678, 2008.03
    國際期刊 SCI,多位作者(第二作者), Impact Factor: 2.149, Rank Factor: 13/43
    Subject Categories: Chemistry, Inorganic & Nuclear
    NSC 95-2221-E-006-184 & NSC 95-2221-E-239-025
    義大機構典藏
  19. C.Y.Kuan, J.M.Chou, I.C.Leu, M.H.Hon, "Formation and field emission property of single-crystalline Zn microtip arrays by anodization", Electrochemistry Communications, vol. 9, no. 8, pp. 2093-2097, 2007.08
    國際期刊 SCI,多位作者(第二作者), Impact Factor: 3.484
    Subject Categories: Electrochemistry
    義大機構典藏
  20. J.M. Chou, M.C. Chuang, M.h. Yeh, W.S. Hwang, S.H. Liu. S.T. Tsai, H.S. Wang, "Effect of process conditions on mixing between molten iron and slag in smelting reduction vessel via water model study", Ironmaking and Steelmaking, vol. 30, no. 3, pp. 195-202, 2003.06
    國際期刊 SCI, EI
  21. 周兆民、 莊名超、 黃文星、 葉孟恆、 劉世賢、 蔡辛慈、 王惠森, "熔融還原煉鐵法製程條件對鐵渣混合影響之水模研究", 材料科學與工程, vol. 34, no. 4, pp. 208-218, 2002.12
    國內期刊
  22. 周兆民, "金屬模離心鑄造法研製梯度分佈球墨鑄鐵基複合材料", 工程科技通訊, vol. 59, pp. 39-41, 2001.10
    國內期刊
  23. 李泳萱、 張鴻斌、 李曜同、 孫啟宏、 周兆民, "金屬模離心鑄造法研製梯度分佈TiC強化球墨鑄鐵基複合材料", 鑄工, vol. 27, pp. 39-41, 2001.01
    國內期刊
  24. 賴韋豪、 張榮方、 洪敏雄、 周兆民, "合金元素添加對沃斯回火球墨鑄鐵硬度與險微組織之影響", 材料科學與工程, vol. 32, pp. 8-14, 2000.01
    國內期刊
  25. 潘文生、 張瑞模、 楊信利、 黃禎烈、 周兆民, "合金添加對球墨鑄鐵基地組織及偏析之影響", 鑄工, vol. 24, pp. 53-71, 1998.09
    國內期刊
  26. 周兆民, "高矽肥粒鐵系球墨鑄鐵沃斯田鐵化之研究", 工程科技通訊, vol. 32, pp. 58-60, 1998.08
    國內期刊
  27. J.M. Chou, M.H. Hon, J.L. Lee, "The Nucleation of Austenite in Ferritic Ductile Cast Iron", Scripts Metallurgica et Materialia, no. 27, pp. 61-66, 1992.01
    國際期刊 SCI, EI
  28. J.M. Chou, M.H. Hon, J.L. Lee, "The Austenite Transformation in Ferritic Ductile Cast Iron", Materials Science and Engineering,A158, vol. A158, pp. 241-249, 1992.01
    國際期刊 SCI, EI
  29. J.M. Chou, M.H. Hon, J.L. Lee, "Effects of Graphite Morphology and Matrix Structure on Mechanical Properties of Cast Irons", J. Materials Science, no. 25, pp. 1965-1972, 1990.01
    國際期刊 SCI, EI
  30. J.M. Chou, J.L. Lee, Y.C. Ko, "Thermal Shock Resistance Test for Cast Iron used in Casting Environments", J. Materials Science, no. 25, pp. 2971-2974, 1990.01
    國際期刊 SCI, EI
  31. 洪敏雄、 周兆民, "沃斯回火球墨鑄鐵", 鑄工, vol. 55, pp. 19-27, 1987.12
    國內期刊
  32. 洪敏雄、 周兆民, "球墨鑄鐵之變韌鐵化處理", 機械月刊, vol. 143, pp. 99-105, 1987.06
    國內期刊
  33. 洪敏雄、 李至隆、 周兆民、 周敏傑, "塊狀球形劑用於模內處理之研究(一)-溶解性質與鎂回收率", 鑄工, vol. 44, pp. 8-17, 1985.03
    國內期刊
  34. 洪敏雄、 李至隆、 周兆民、 周敏傑, "鑄鐵中石墨生長情形之研究", 鑄工, vol. 40, pp. 1-16, 1984.03
    國內期刊
  35. 洪敏雄、 李至隆、 周兆民、 周敏傑, "高純度生鐵製造肥粒鐵細球墨鑄鐵之研究", 鑄工, vol. 38, pp. 1-9, 1983.09
    國內期刊